Your Global Resource for Industrial Hardface Technology
and Wear Resistant Technologies
Postle Industries Logo
Tungsten Carbide Hardfacing Product Reference View detailed information about Postalloy® Hardfacing Products
POSTALLOY® 220HD is a proprietary blend of Tungsten Carbide with a small addition of Chromium Carbide. It produces a very smooth weld deposit with improved impact resistance over pure Tungsten Carbide. The unique blend of Tungsten Carbide in a Chromium rich matrix also provides some corrosion protection but primarily helps to provide a high polish in service to reduce the coeffcient of friction. When protection against severe abrasion, with limited impact, is needed, POSTALLOY® 220HD is an ideal choice.
   • Easy out-of-position weldability with the 1/4" diameter
   • Excellent AC or DC operation, even on a "buzz box"
   • Low amperage and high metal recovery - no slag to chip. POSTALLOY® 220HD is over 90% efficient.
   • High deposition rates - up to 3 times faster than ordinary electrodes
   • Moisture resistant coating, even under severe weather or high humidity
Product Type
Flux-coated Tubular Electrode alloyed with Tungsten Carbide and Chromium Carbide

Weld Deposit Properties
Average 2 Layer Hardness
Tungsten Carbide Hardness
Deposit thickness
2 layers
Relief checks readily to prevent stress build-up.

Conveyor screws and augers
Cutter and dredge teeth
Mixer paddles and blades
Shredder and anvil knives
Bucket pin ends
Coal and cement fans
Tamping tools

POSTALLOY® 220HD    Welding Parameters
Current: AC or DC Reverse Polarity
1/4" (6.0mm)
3/8" (9.5mm)
1/2" (12.7mm)

Welding Procedure
Remove old hardfacing and any fatigued base metal. POSTALLOY® 250 gouging electrode is useful for this purpose. Preheat from 200-400ºF (93-204ºC) is recommended for steels with a carbon content of.25 to .45. Steels with a higher carbon level should be preheated from 400-700ºF (204-371ºC). Do not preheat austenitic manganese steels. Use a minimum arc length equal to about the diameter of the electrode. Hold the electrode at 90º to the work surface for a proper application. Do not apply more than two layers. On manganese or hardened steel, an intermediate or cushion layer of POSTALLOY® 207 is recommended.

Packaging Options
Standard Packaging
1/4" (6.0mm)
Resealable Plastic Box
3/8" (9.5mm)
Resealable Plastic Box
1/2" (12.7mm)
Resealable Plastic Box